.
ATTACHMENTS, OPTIONS HANDLING PAYLOAD METER II (CARD TYPE) ATTACHMENTS, OPTIONS HANDLING PAYLOAD METER II (CARD TYPE) 6 - 77 Remarks Calibration cannot be carried out when problem has occurred Calibration cannot be carried out when problem has occurred Applicable only when clinometer switch is set to "used" Calibration cannot be carried out when problem has occurred Calculation of payload is stopped when problem has occurred Recording of problem and warning data (display code for personal computer software) Record (000-021) (000-022) (000-023) (000-024) Record (000-025) (000-026) (000-027) (000-028) Record (000-031) (000-032) Record (000-019) Timing possible for display When normal When normal When normal When normal Content of error code display Display canceled When problem is removed When problem is removed When problem is removed When problem is removed External display lamps All flash All flash All flash All flash Panel display F-21 flashes F-22 flashes F-23 flashes F-24 flashes F-25 flashes F-26 flashes F-27 flashes F-28 flashes F-31 flashes F-32 flashes F.CAL flashes Judgment standard Suspension pressure sensor input signal 0 kg/cm2 or below Suspension pressure sensor input signal 200 kg/cm2 or above Clinometer input signal more than +100 EG or more Clinometer input signal more than -100 EG or more Recorded data for calibration corrupted Content Short circuit or disconnec- tion in front left suspen- sion sensor system Short circuit or disconnec- tion in front right suspen- sion sensor system Short circuit or disconnec- tion in rear left suspen- sion sensor system Short circuit or disconnec- tion in rear right suspen- sion sensor system Short circuit with power source in front left suspension sensor system Short circuit with power source in front right suspension sensor system Short circuit with power source in rear left suspension sensor system Short circuit with power source in rear right suspension sensor system Short circuit or disconnection in clinometer system Short circuit with power source in clinometer system Calibration not carried out or problem in RAM Priority of display 7 8 9 10 11 12 13 14 15 16 17