. ATTACHMENTS, OPTIONS HANDLING MACHINES EQUIPPED WITH KOMTRAX Plus BASIC PRECAUTIONS WARNING PROCEDURE WHEN DOWNLOADING 6 - 104 Never disassemble, repair, modify, o r move the KOMTRAX Plus, communications ter minal, antenna, or cables. This may cause failure or fire on the KOMTRAX Plus communications terminal or the machine itse lf. (Your Komat su distributor w ill perform removal and installation of the KOM TRAX Plus and communications terminal.) Do not allow cables or cords to beco me caught; do not damage or pull cables or cord s by force. Sho rt circuits or dis connected wires may cause failure or fire on th e KOMTRAX Plus communications terminal or the machine its elf.
For anyone wearing a pacemaker, m ake sure that the communications antenna is at least 22 cm (8 .7 in) from the pacemaker. The radio waves may have an adver se effect on the operation of the pacemaker. Near the blasting jobsite, there may be a danger of unexpected explosion due to u se of interactiv e wireless com munication device of KOMTRAX Plus and resul ting serious personal injury or death. Make su re to operate th e machine aw ay from the blasting jobsite.
If you have to oper ate the machine within 12 m (39 ft 4 in) from t he blasting jobs ite or the remo te blasting device, ask your Komatsu distributo r to disconnect power source cable of KOMTR AX Plus in adva If there are any restriction or law o restriction or law has a priority than KOMTRAX Plus specifications are a Rated transmit power: 5 to 10 W Transmit frequency:
148 to 150 MHz NOTICE Contact your Komatsu distributor be fore installing a top guard or other attachmen t that covers the Be careful not to get water on the co REMARK The communications terminal us es wireless communications, so it cannot be used insid e tunnels, und erground, inside buildings, or in mountain a reas where radio waves cannot be receive d. Even when the machine is outside, it cannot be used in areas where the radio signal is weak or in areas outsid e the wireless communicati on service area. There is absolutely no need to inspect or operate the KOMTRAX Plus or communications terminal, but if any ur Komatsu distributor.
abnormality is found, contact yo WHEN DOWNLOADING FROM CONNECTOR INSIDE CAB (BEHIND ASSISTANT'S SE 1. Turn the starting switch to ON 2. When downloading, remove download. 1. Turn the starting switch to ON