3.3.2. Re-assembling Cam Shaft 30 3.3.3. Install the hydraulic head CMP. 34 3.3.4. Assembling the Hydraulic Head 35 3.4. Re-assembling the Governor 39 3.5. Combining Governor and Pump Bodies 40 4. ADJUSTMENT OF FUEL INJECTION PUMP AND GOVERNOR 42 4.1. Preparations 42 4.2. Bottom clearance adjustment(Fuel Injection Timing) 44 4.2.1. The bottom clearance adjusting value and the Cam classification 45 4.3. Adjustment of Governor 46 4.3.1. Adjustment of No Load Max. Engine Speed 46 4.3.2. Adjustment of Fuel Limit Bolt 46 4.3.3. Adjustment of Torque-Rise Point 46 4.3.4. Adjustment of Reverse Angleich 47 4.3.5. Adjustment of Staring Injection Amount 48 4.3.6. Checking the Injection Stop 48 5.
FUEL INJECTION NOZZLE 49 5.1. Functioning of fuel injection nozzle 49 5.2. Type/construction of fuel injection nozzle 49 5.3. Fuel injection nozzle disassembly 50 5.4. Fuel injection nozzle inspection 51 5.4.1. Washing 51 5.4.2. Nozzle inspection 52 5.5. Fuel injection nozzle reassembly 53 5.6. Adjusting fuel injection nozzle 53 5.6.1. Adjusting opening pressure 53 5.6.2. Injection test 54 6. TROUBLESHOOTING 55 6.1. Troubleshooting of fuel injection pump 55 iii