. OPERATION OPERATION ADJUST SEAT BELT Always wear the seat belt. WARNING the belt on both the buckle and the belt at 90 3 - 113 B efore fastening the se at belt, check that there i s no abn ormality in t he belt-mounting b racket or mou nting of the belt. If th e belt s worn or damaged, re F asten the seat belt be fore starting operations A lways wear the seat b elt during operations. M ake sure that the left and right belts are not t wisted w hen fastening t he seat belt FASTENING AND REMOV ING BELT it is tight without being too tight. press the brake pedal fully, and adjust the ack is pressed against the backrest. Fasten the belt so that it is tight without bein g too ti 1. 2. 3. 1.
Sit on the seat, de press the brake peda l fully, seat so that your b ack is pressed agains t the b ackrest. 2. After adjusting the seat position, adjust tether b elt (1). Tense the tether belt and install it when there is no one sitting on the seat. 3. Sit on the seat, hold buckle (2) and tongu e (3) wit h your l eft and right hands, insert tongue (3) into buckle (2), the n pull t he bel to check that it is s ecurely locked. 4. When removing th e belt, press the red b utton in buckle (2 ) to free the belt. Fasten the belt alo ng your body withou t kinkin g it.
Adjust th e l engths of t tongue sides so th at the buckle is locate d at the front, mid-poin t of your ADJUST BELT LENGTH To make belt shorter: Pull the free end of th e tether To make belt longer: S egrees to the holder, and pul