g ;;RsbJ);G; zix$~ follow these safety precautions may lead 6. GENERAL PRECAUTIONS l When standing up from the operator’s seat, always place the safety lock levers and parking brake lever securely in the LOCK position. If you accidentally touch the levers when they are not locked, the work equipment may suddenly move and cause serious injury or damage. ALWAYS APPLY LOCK WHEN LEAVING OPERAT l When leaving the machine, lower the blade and ripper completely to the ground, set the safety lock levers and parking brake lever to the LOCK position, then stop the engine. Use the key to lock all the equipment. Always remove the key and take it with you.
Work equipment posture + See “12.11 PARKING MACHINE”. Locking + See “12.15 LOCKING” MOUNTING AND DISMOUNTING Never jump on or off the machine. Never get on or off a moving machine. When getting on or off the machine, always face the machine and use the handrails and steps. Never hold any control levers or lock levers when getting on or off the machine. Maintain three-point contact to be sure that you do not fall from the machine. Repair any damaged handhold, and tighten any loose bolts. Handholds, track frame shoes must be free of oil, grease and excessive dirt. and track AE212050 AE212060 AL187320 l-3