Komatsu — 24.7 EVERY 1000 HOURS SERVICE

24.7.4 CHANGE OIL IN FINAL DRIVE CASE A WARNING The oil is at high temperature immediately after the machine has been operated. Wait for the oil to cool down before starting the operation. Prepare the followings. l Container to catch drained oil: Min. 15 e capacity Refill capacity: D31E, P-20, D37E-5: each 9.5 .@ (2.51 US gal, 2.09 UK gal) D31P-20A, D37E-5A: each 12 e (3.17 US gal, 2.64 UK gal) D31PL, PLL-20: each 15 fi (3.96 US gal, 3.30 UK gal) Socket wrench Replace the oil in both final drive cases. 0 l 0 1. Set a container to catch the oil under drain plug 8. 2. Remove drain plug @ and oil filler plug @ to drain the oil, then tighten drain plug 8. I 3.

Refill the specified quantity of engine oil through oil filler 0. NOTICE For details of the oil to use, see “20. USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE”. 4. Check that the oil is at the specified level. For details, see “24.5 EVERY 250 HOURS SERVICE” 3-54