g WARNING: Failure to follow these safety precautions may lead to a serious accident. 7. PRECAUTIONS DURING OPERATION 7.2 AFTER STARTING ENGINE Failure to carry out the checks properly after starting the engine will lead to delays in discovery of abnormalities, and this may lead to serious injury or damage to the machine. When carrying out the checks, use a wide area where there are no obstructions. Do not allow anyone near the machine. l Check the operation of the gauges and equipment, and check the operation of the blade, ripper, brakes, travel system, and steering system.
l Checks for any abnormality in the sound of the machine, vibration, heat, smell, or gauges; check also that there is no leakage of air, oil, or fuel. l If any abnormality is found, carry out repairs immediately. If the machine is used when it is not improper condition, it may lead to serious injury or damage to the machine. Before starting off, check again that there is no one in the surrounding area and that there is no obstacles. When starting off, sound the horn as an alert. Always operate the machine only when seated. An additional worker may ride in the machine only when sitting in the passenger seat. Do not allow anyone to ride on the machine body.
Fasten your seat belt securely equipped with seat belt. Check that the backup alarm works properly. Always close the door of the operator’s compartment and check that the door is securely locked. AE305'300 4 CHECK WHEN CHANGING DIRECTION 1 To prevent serious injury or death, always do the following before moving the machine or doing the leveling work. l Before changing between forward and reverse, reduce speed and stop the machine. l Check that there is no one near the machine. Be particularly careful to check behind the machine. l Before operating the machine, sound the horn to warn people in the area.
l When operating in areas that may be hazardous or have poor visibility, designate a person to direct worksite traffic. l Ensure that no unauthorized person can come within the direction of turning or direction of travel. Always be sure to carry out the above precautions even when the machine is equipped with a backup alarm and mirrors.