a EVF34I_EGs Faiiaiz$ follow these safety precautions may lead 8. PRECAUTIONS FOR MAINTENANCE STOP ENGINE BEFORE CARRYING OUT INSPECTION AND MAINTENANCE When carrying out inspection and maintenance, park the machine on level ground where there is no danger of falling rocks or land slides, or of flooding if the land is low, then lower the work equipment to the ground and stop the engine. Operate blade control lever @ several times to the RAISE and LOWER positions to release the remaining pressure in the hydraulic circuit, then set safety lock lever @ to the LOCK position. Put blocks under the track to prevent the machine from moving.
The worker carrying out the maintenance should be extremely careful not to touch or get caught in the moving parts. BI ock AE21279B 98 Machines stopped by fuel control lever Machines stopped by starting switch Engine stop AM089160 When carrying out inspection and maintenance with the blade raised, fit a stand securely under the blade to prevent the blade from coming down. Place the work equipment control levers at HOLD, and set the safety lever and parking brake lever to the LOCK position. SAFETY DEVICES FOR WORK EQUIPMENT ti A0055140 1-21