12. OPERATION 12.1.4 OPERATIONS AND CHECKS BEFORE STARTING ENGINE If the control levers are touched by accident, the work equip- When leaving the operator’s compartment, always set the safety lever securely to 1. Check that the brake pedal is locked with brake lock lever 0. @--Y 1 AE218280 2. Confirm that speed stage indicator window @ indicates the first speed. 3. Check that steering, directional and speed lever @ is the N (neutral) position and is locked with safety lever 0. When starting the engine, check that the levers are at the N position and that the safety lever is at the LOCK position. If they are not at these positions the engine will not start. 4.
Check that the blade is lowered on the ground and the blade control lever is locked with safety lever 0. \I AE218318 2-24