12. OPERATION 12.4 MOVING MACHINE A WARNING When moving off, check that the area around the machine is safe, and sound the horn before moving. Clear all personnel from the machine and the area. Clear all obstacles from the path of the machine. Use extreme care when reversing the machine. Note there is an blind spot behind the machine. When starting on slopes, always keep brake pedal @ de- pressed even after releasing brake lock lever 0. When starting on a sharp slope, raise the engine speed to the maximum and set the steering, directional and speed lever @ to the first speed of F (Forward) or R (Reverse) with brake pedal @ depressed.
If the machine starts slowly (or the shoe slips), release brake pedal @ gradually to start the machine. If the machine is equipped with the backup alarm, set the steering, directional and speed lever @ to the reverse posi- ._ __ _ tton and confirm that the alarm operates normally. II 1. Pull fuel control lever @ to increase the engine speed. Operate steering, directional and speed lever @ and confirm that the desired speed is selected by speed stage indicator window 2. Speed stage indicator window 2nd 0. 3rd Set safety lever @ for blade control lever 0 to the FREE position. ] AE21840B 3.
Free Put blade control lever 0 in the RAISE position to raise the blade 400 to 500 mm (16 to 20 in) off the ground. \I AE21841B 4. 2-30