12.7 STEERING MACHINE. A l Avoid as much as possible turning the machine on a slope. The machine will tend be taken on soft or c l Never make a pivot turn at high speed. I // /v AE218450 12.7.1 NORMAL TURNING To turn the machine while traveling, incline steering, directional and speed lever @I in the direction to turn. l When turning to the left gradually while traveling forward ( Incline the steering, directional and speed lever forward, then incline it to the left (L) halfway, and the steering clutch is disengaged and the machine turns to the left gradually.
REMARK When turning to the right gradually while traveling forward, incline the steering, directional and speed lever forward, then incline it to the right halfway. The turning method during the reverse travel is the same. I AE7.18510 Using the lever guide for fine control If you use the lever guide, it is easier to make fine adjustments in the steering direction. There are the following two methods of using the lever guide. A: Hook your fingers or thumb over the left or right guides, and B: operate the steering with a light touch. - I Keep your wrist fixed and run all your fingers along the front of Right steering Left steering operation operation the guide to operate the steering. EI:
Select the method which you find best matches the frequency and ease of use. II AE21852B 2-33