250 Engine Start and Operation When the engine has started, the preheater may be re-engaged to assist in faster engine warm-up. To re-engage, turn the key to the preheat position and the preheater will en- gage. The starter will not engage as the start position is locked out. Engines Without Preheater Engines not equipped may, depending on coolant temperature, take longer to start. If this should happen, do not release the igni- tion key until the engine has started (while still observing the 30 second maximum cranking time).
Coolant Temperature Preheater Engagement Time (seconds) Above +120 F (50 C) 0 Above +50 F (10 C) 0 Between +4 F (-15 C) and +50 F (10 C) 25 ± 2 to 50 ± 2 Below +4 F (-15 C) 50