volvo — Volvo VNL and VNM Operator's Manual

Brakes 275 Brake System Controls The air compressor, governor, pressure reg- ulator valve and reservoirs are control devices. Their function is to build up, maintain and control air pressure in the reservoirs. This is so that pressure is held constant between the minimum and maxi- mum range established for air brake operation. The brake valve, quick release valve, brake chambers and slack adjusters are applica- tion devices. They distribute the air pressure and convert its energy into the me- chanical force necessary to apply or release the brakes. Foot Brake Valve The foot brake valve is directly connected to the brake pedal. The valve gives a pro- gressive output against the pedal travel.

This allows better control of the pressure in the first half of the pedal travel. In the last half of the pedal travel, the pressure output increase is faster. The foot brake valve applies the service brakes, incorporating both the primary and secondary air systems. The primary system controls the rear brakes and the secondary system controls the front brakes. The foot brake valve receives air from the com- pressed air tanks. Air pressure is then delivered to the wheel brake chambers as required by the amount of pressure exerted on the foot brake pedal. The brake chamber force then applies the wheel brakes. W5000920