278 Brakes Parking Brake/Trailer Supply Valves Trucks/Tractors have two air control valves on the instrument panel: Trailer Supply (red octagonal knob) System Park (yellow diamond knob) The two air control valves are intercon- nected and interacting. The System Park valve supplies and controls the Trailer Air Supply valve. The System Park valve knob (yellow) should be pushed in first, after sufficient air pressure is built up (apply foot brake to pre- vent vehicle from rolling). The Trailer Air Supply valve knob may then be pushed in.
W5000924 The Trailer Air Supply valve knob and Sys- tem Park valve knob will automatically pop out if the system pressure (both front and rear circuits) drops to 25 to 35 psi (170 to 240 kPa). The tractor protection valve will then close, the tractor spring brakes will apply and the trailer emergency system will be activated. On vehicles equipped with the standard two valve system, the operation of one valve to- gether with the other permits the operator to select the desired functions described be- low: Red Valve (Trailer Air Supply) Yellow Valve (Sys- tem Park) Function (Mode) Out Out System Park In Out Trailer Charge In In Normal Running Out In Bobtail