Brakes 281 Spring Brake For Parking Never leave the vehicle without being certain the parking brakes are set or that other precautions are taken to prevent the vehicle from rolling. Failure to do so can result in serious personal injury or death. The parking brake mechanism uses spring pressure as a separate power medium to ap- ply the service brakes on the driving axles. The parking brake is released by the same compressed air source used to apply the service brakes. Since this brake is released by air pressure, the system must be charged to at least 60 psi (420 kPa) before the park- ing brake may be released.
W5000643 The parking brake spring tension is suffi- cient to hold a fully loaded vehicle on maximum grades permitted on modern highways, provided the brake drums and linings are in good condition and the brakes are properly adjusted. CAUTION Do not use the spring parking brakes if the service brakes are hot, such as after descending a steep grade. Also, do not use the spring parking brakes during freezing temperatures if the wheel brakes are wet. To do so could damage the brakes, if hot, or may cause them to freeze during cold weather. If the brakes are wet, drive the vehicle in low gear and lightly apply the brakes to heat and dry them.
Allow hot brakes to cool before using the parking spring brakes.