volvo — Volvo VNL and VNM Operator's Manual

Brakes 289 Volvo Exhaust Brake The exhaust brake is standard on the Volvo D12 engine. It is used to reduce wear on the brake linings. The exhaust brake is most effective at high engine speeds (1,500 to 2,300 r/min). The exhaust brake is auto- matically disengaged if the engine speed drops to or below 1,100 r/min. The exhaust brake works by containing the exhaust gases in the exhaust manifold, thereby making the engine work against the back pressure. This provides a retarding force on the drive wheels. The exhaust brake is operated by a two- position switch in the right-hand switch cluster. For the exhaust brake to function, the following must be in effect:

The switch is ON Accelerator and clutch pedals are fully released Engine speed exceeds 1,100 r/min W3001324 When the cruise control is engaged, the ex- haust brake automatically engages if the selected cruise speed is exceeded by ap- proximately 5 mph (8 km/h). The exhaust brake is then disengaged when the speed has returned to approximately 3 mph (5 km/h) above selected cruise speed. NOTE! For both exhaust and engine brakes, use a “one gear” driving strategy when going downhill to keep engine speed up for effective braking (for example: up- hill 7th gear and downhill 6th).