volvo — Volvo VNL and VNM Operator's Manual

Brakes 291 Jake-Brake Or C-Brake The Jake-Brake or C-Brake is optional equipment for Cummins and Detroit Diesel engines. These engine brakes are similar in operation. Three power levels are available by engaging 2, 4, or 6 cylinders when brak- ing. (For Cummins M11, only two power levels are available.) It is operated by two switches in the right hand switch cluster. It works together with the exhaust brake to provide two levels of braking power. The left switch is the ON/OFF switch. The desired braking power is selected with the right switch which has three positions: LOW, MED. and HIGH (for Cummins M11, only LOW and HIGH).

W3002303 For the exhaust brake to function, the fol- lowing must be in effect: The switch is ON Vehicle speed over 7.5 mph (12 km/h) Engine temperature over 110 F (43 C) Accelerator and clutch pedals fully re- leased Engine speed exceeding 1100 r/min When the cruise control is engaged, the ex- haust brake automatically engages if the selected cruise speed is exceeded by ap- proximately 5 mph (8 km/h). The exhaust brake is then disengaged when the speed has returned to approximately 3 mph (5 km/h) above the selected cruise speed. For more information, read the Jake-Brake or C-Brake operator’s manual.