Pre-Trip Inspection and Daily Maintenance 33 Pre-Trip Inspection Quick List W0001230 Inspect the vehicle in a circular manner as shown in the illustration. Numbers between parentheses in the list, re- fer to pages in this manual where component function and necessary inspection is explained in greater detail. Approaching the Vehicle Check under the vehicle for oil, fuel, coolant leaks or other signs of damage. Check body surfaces for signs of breaks or damage. Step 1: Left Side Of the Cab Left Front Wheel Check condition of wheel rim. Espe- cially look for cracks, missing lockrings, bent or broken studs, clamps or lugs.
Preparation Open drain cocks on air tanks to let the tanks drain ( page 283). Chock wheels on vehicle and, if hooked up, trailer. Close air tank drain cocks. Start the engine and let the air pres- sure build up to normal ( page 273). Stop engine. Switch on parking lights and four-way flashers ( page 99). Apply parking brakes ( page 278). Release the hood latches ( page 30). Raise hood. Check condition of tire: properly in- flated, no serious cuts, bulges, tread wear or any signs of misalignment; valve stem not touching wheel, rim or brake drum; valve cap in place. Check wheel bearing and hub: no ob- vious leaking on outside or inside wheel. Verify correct oil level in hub.
Left Front Suspension Check condition of spring, spring hangers, shackles, U-bolts: no cracks, breaks or shifting. Check shock absorber condition.