Additional Safety Features 53 Sleeper Safety Restraint Always use the safety restraint when the vehicle is in motion. Failure to do so not only may cause severe injuries or death to the passenger in the event of an acci- dent but also poses a danger of injuries to other occupants of the vehicle. W8000895 Anytime the vehicle is in motion, a pas- senger using the sleeper bunk should be strapped in using the safety restraint. The top bunk should always be used with the harness in place, whether the vehicle is in motion or not. Falling from the upper bunk can result in severe per- sonal injury or death. The restraint netting can be used for secur- ing loose articles.
Any loose articles that can shift in the cab during hard cornering or braking should be kept restrained. Fasten the restraint by connecting the buckle with the latch. Make sure the belts are not twisted. Test the latch connection by pulling on the belt. If they come apart, reconnect and test again. If the connection can not be made, replace the belt before us- ing the bunk for sleeping during driving. To loosen the restraint, press the red release button on the latch (1). Restraints should be properly stored when not used. Having the restraint laying loose in the cab can be a source for unintentional snagging. W8002475