volvo — Volvo VNL and VNM Operator's Manual

Additional Safety Features 55 Inspection Check the belts, buckles, latch plates, re- tractors, anchorages, and guide loops to ensure that they are working properly. Look for loose/damaged parts (without disassem- bling) that could keep the restraint system from working properly. If the safety belt, retractor and hardware were in use during a collision, they must be replaced. The re- straint system anchorage fasteners must be replaced if necessary. If there is any doubt about the restraint system’s effectiveness, replace the entire safety belt assembly. Failure to properly inspect and maintain the safety belts can cause serious per- sonal injury or death.

It is critical that any time a vehicle has been involved in an accident, the entire safety belt system must be replaced in the vehicle (which also includes the sleeper bunk restraints) if they were in use at the time of the accident. Failure to replace the safety belt system may re- sult in serious injury or death. A damaged safety belt, whether visibly damaged or not, could result in serious personal injury in the event of an acci- dent. The safety belt systems should be replaced at least every five years. Do not bleach or re-dye the color web- bing because it may cause a severe loss of belt strength.

This loss of strength could allow the safety belt to break under stress, thus resulting in severe per- sonal injury or death.