Additional Safety Features 59 Important Facts About Safety Belts in Heavy Trucks The high mileage associated with heavy trucks, the continual relative movement of the seat with the cab, the possible contact with the vehicle seat or other parts of the cab structure, and the potential exposure of this safety belt to severe environmental con- ditions make it crucial to inspect the seat belt system regularly. It is recommended that the system be inspected every 15,000 miles (24,000 km) or more often if the ve- hicle is exposed to severe environmental or vocational conditions.
Any safety belt sys- tem that shows cuts, fraying, extreme or unusual wear, significant discolorations due to ultra-violet ray exposure, dusty-dirty conditions, abrasion to the safety belt web- bing or damage to the buckle, latch plate, retractor, hardware or any other obvious problem should be replaced immediately, regardless of the mileage. Once replacement of the safety belt has been determined necessary, be certain that it is replaced only with a Volvo original re- placement safety belt. See your authorized Volvo Truck dealer for replacement. Your Volvo safety belt system has been devel- oped and tested specifically for heavy trucks.
Replace it only with the exact same design that the vehicle was equipped with. If the inspection indicates that any other part of the safety belt system requires re- placement, the entire belt system must be replaced. An installation guide is attached to every replacement system, entitled “Three-Point Safety Belt Installation Guide.” There are separate safety belt instruction guides for suspension and sta- tionary seats. Use the proper guide for your type of seat and follow the instructions very closely. It is vitally important that all components are mounted back in the same positions as the original components that were removed.
This will maintain the de- sign integrity of the mounting points for the safety belt assembly.