E: SWITCHES 1. WORKING MODE SLECTOR SWITCH (BASIC MODE) This switch is used to set the movement or power for the work equip- ment to match the content or purpose of the operation. H.0 (heavy-duty op,eration mode) lights up: This is used for heavy-duty work. G.0 (general operation mode) lights up: This is used for ordinary work. F.0 (finishing operation mode) lights up: This is used for leveling or grading work. L.0 (lifting operation mode) lights up: This is used for fine control operations. * When starting the engine, the general operation mode (S mode) is auto- matically selected. 2.
POWER MODE SWITCH (SELECTED MODE) This switch is used to set output force for the work equipment to match the content or soil quality for the operation. H lights up: This is used for high productivity loading operations. S lights up: This is used for normal operations. L lights up: This is used for grading or other light-duty operations. 3. AUTO-DECELERATION SWITCH (SELECTED MODE) engine speed is lowered when all the control levers are at neutral. This switch is used to actuate the auto-deceleration system so that the Auto-deceleration is actuated ON lights up: Auto-deceleration is canceled OFF lights up: t For the use of switches 1, 2, and 3, see METHOD OF USING MODE SELECTOR SWITCHES.
- 16-