38 P-Code DST-1 Display Remarks Description P0182 Fuel Temperature Sensor Malfunction (LO) Integrated in the supply pump. "The temperature cannot be detected properly. There are possibilities of the sensor malfunction, short circuit to ground in the harness." P0183 Fuel Temperature Sensor Malfunction (HI) Integrated in the supply pump. "The temperature cannot be detected properly. There are possibilities of the sensor malfunction, open and short circuit to +B in the harness." P0191 Rail Pressure Sensor Malfunction Characteristic malfunc- tion The rail pressure cannot be detected properly. There is a possibility of the sensor malfunction.
P0192 Rail Pressure Sensor Malfunction (LO) The rail pressure cannot be detected properly. There are possibilities of the sensor malfunction and short circuit to ground in the harness. P0193 Rail Pressure Sensor Malfunction (HI) "The rail pressure cannot be detected properly. There are possibilities of the sensor malfunction, open and short circuit to +B in the harness." P0200 ECU Charge Circuit Malfunction (HI) The voltage for the injector activation is too high. Replace the ECU. P0201 Injector 1 Open Circuit There is a possibility of the Injector 1 malfunction or open circuit in the harness.
P0202 Injector 2 Open Circuit There is a possibility of the Injector 2 malfunction or open circuit in the harness. P0203 Injector 3 Open Circuit There is a possibility of the Injector 3 malfunction or open circuit in the harness. P0204 Injector 4 Open Circuit There is a possibility of the Injector 4 malfunction or open circuit in the harness. P0205 Injector 5 Open Circuit There is a possibility of the Injector 5 malfunction or open circuit in the harness. P0206 Injector 6 Open Circuit There is a possibility of the Injector 6 malfunction or open circuit in the harness. P0217 Over Temperature Condition The over temperature condition has been detected. Check the cooling system.
P0219 Engine Over speed Condition The engine speed exceeded the rated value. P0234 Turbo Charger Overboost Condition The boost pressure is too higher than the specified value. P0237 Boost Pressure Sensor Malfunction (LO) "The intake air pressure cannot be detected prop- erly. There are possibilities of the sensor malfunction, open and short circuit in the harness." P0263 Correction Error Between Cylinders #1 The rotation fluctuation in the cylinder 1 became big- ger than other cylinders. There is a possibility that the flow damper is operat- ing. P0266 Correction Error Between Cylinders #2 The rotation fluctuation in the cylinder 2 became big- ger than other cylinders.
There is a possibility that the flow damper is operat- ing.