Komatsu — Transmission Cutoff Switch

Transmission Shift Mode Selector Switch OPERATION The transmission shift mode selector switch (3) is used to change the shift point when the AUTO SHIFT/MANUAL selector switch has been switched to auto-shift. At each of the L, H positions, the system switches to auto-shift and the auto-shift pilot lamp on the machine monitor lights up. Normally, set to auto-shift. MANUAL position: System is set to manual shift and speed range is a position selected by gearshift lever. L position: Travel speed when shifting up is low (flat ground, normal travel). If it is set to the L position when the work is mainly operations on flat ground, it is possible to shift up when the engine speed is low.

This is effective in reducing fuel consumption. H position: Travel speed when shifting up is high (traveling uphill, traveling at high speed). For details of the manual shift, see “Manual Shift” on page 2-59. For details of the auto-shift, see “Automatic Shift” on page 2-59. Transmission Cutoff Switch When moving the machine off an uphill slope, set the transmission cutoff switch to the OFF position; depress the brake pedal; then gradually depress the accelerator pedal and release the brake slowly to allow the machine to start off. This prevents the machine from rolling backwards. The transmission cutoff switch (4) is used to turn the transmission cutoff system ON and OFF.

When the switch is pressed, the pilot lamp lights up and the system turns ON. The transmission is shifted to neutral at the adjusted brake pedal depression position. Keep the switch at the ON position normally. For details about adjusting the cutoff position, see “Adjusting Transmission Cutoff Position” on page 2-115. Position (a): OFF The brake pedal acts in the normal manner. Position (b): ON Left brake pedal acts as normal brake but also switches the transmission to NEUTRAL. Remark The brake pedal position when the cutoff system is actuated can be adjusted by using the transmission cutoff set switch on the right switch panel. WA380-6 2-45