OPERATION Check for Ease of Starting Engine, Abnormal Noise When starting the engine, check that the engine does not make an abnormal noise and that it starts up easily and smoothly. Check that there is no abnormal noise when the engine is idling or when the revolution rises slightly. When there is an abnormal noise at engine start-up and if that condition continues, the engine may be damaged. In that case, ask your Komatsu distributor to check the engine as soon as possible. Check Engine at Low Speed and When Accelerating Check that there is no irregularity in the engine speed and that the engine does not suddenly stop when the machine is stopped during normal travel.
Check that the engine accelerates smoothly when the accelerator pedal is depressed. Carry out the inspection in a safe place and check that there is no one in the surrounding area. If the condition at low speed or when accelerating is extremely poor and that condition continues, there is danger that the engine may be damaged, that the operation of the machine may become erratic, that the braking effect may deteriorate, or that an unexpected accident may happen. Ask your Komatsu distributor to carry out repairs as soon as possible. Check Location of Abnormalities from Previous Days Check the places where problems occurred when using the machine on previous days.
If any abnormality is found, contact your Komatsu distributor for inspection and repair. Normal Operation After starting the engine, do not immediately start operations. First, perform the following operations and checks. Remark Do not suddenly accelerate the engine before the warming-up operation is completed. Do not run the engine at low idle or high idle continuously for more than 20 minutes. If it is necessary to run the engine at idle, apply a load from time to time or run the engine at a mid-range speed. 1. Depress accelerator pedal (1) lightly and run the engine with no load at mid-range speed for about five minutes. 2-104 WA380-6