Komatsu — Replace Hydraulic Tank Breather Element

MAINTENANCE Replace Hydraulic Tank Breather Element The parts and oil are VERY HOT immediately after the engine is stopped, and may cause serious burns. Wait for the temperature to go down before starting the work. When removing the oil filler cap, turn it slowly to release the internal pressure and then remove it. 1. Lower the bucket horizontally to the ground and apply the parking brake. 2. Stop the engine and wait for the temperature of all parts to go down. 3. Before removing the oil filter cap (F), clean around the filter cap to avoid any dust or dirt from entering the hydraulic system. Dust or dirt can damage the system. 4. Remove the cap of oil filler (F). 5.

Remove breather (1) built into the cap. 6. Replace the filter element (2) built into the breather with a new part, then install breather (1) to the cap. 7. Tighten the cap of oil filler (F). 3-74 WA380-6