BF25D/30D BF25D-BF30D — Sep '94

B F25DmB F30D 5. SHIRCABLE Adjustment (Long Tiller Handle Type) 11 1 “NEUTRAL” POSITION Adjust the shift rod (P. al) . 3-13 of the base shop manu- Set the shift lever in the “Neutral” position and discon- nect the shift cable from the shift link B. Set the shift lever in the “Neutral” position and move it a few times within the range of play. PI SHIFT LINK B Check again that the shift link B is in the “Neutral” Dosition. Loosen the shift pivot lock nut. Turn the shift pivot and adjust the shift cable length so that the shift pivot can be set on the shift link B smoothly. [llSHIFTLINKB PI 6 mm LOCK PIN After adjustment, tighten the lock nut securely.

[6] SHIFT PIVOT Install the shift pivot on the shift link B. Operate the shift lever and be sure that the shift link B sets in each position smoothly. SHIFT CABLE STEERING FRICTION r i i GOPPER (At locked) (Long Tiller Handle Type Without Mechanical Tilt) a 111 InspectiodAdjustment 1) Set the steering friction lever in the lock position (i.e. fully to the left until the steering friction lever comes in contact with the stopper). L ;:cETqb“G LEVER 3-8