5. FUEL SYSTEM BF25D-BF30D 1. CARBURETOR ASSEMBLY REMOVAL 2. SILENCER COVER 3. MANIFOLD/CARBURETOR 4. CARBURETOR ASSEMBLY INSTALLATION 1. CARBURETOR ASSEMBLY REMOVAL 6x12, [l] BREATHER TUBE Gasoline is highly flammable and explosive. You can be burned or seriously injured when han- dling fuel. Keep heat, sparks, and flame away. Handle fuel only outdoors. Wipe up spills immediately. Loosen the drain screw of each cylinder and drain the engine before removing the carburetor assem- bly. 1) Remove the engine cover (P. 3-4 of the base shop manual). [2] SILENCER COVER 2) Remove the 6 x 12 mm flange bolt and pull off the breather tube from the silencer cover.
[l] CONNECTOR BRACKET [2] SE 2P CONNECTOR 3) Remove the fuse holder from the connector bracket. 4) Remove the SE 2P connector from the connector bracket and disconnect the 2P connector. [31 FUSE HOLDER 5) Detach the throttle rod pivot from the throttle cam. [l] THROTTLE CAM 121 ~ H R O ~ L E ROD I PIVOT