6. FLYWHEEIfTIMING BELT B F25D.B F30D 1. FLYWHEEL 1. FLYWHEEL a. ASSEMBLY [l] 18 mm SPECIAL NUT \ 1) Clean the flywheel and crankshaft mating surfaces and the tapered part of the crankshaft with a clean shop towel and degreasing agent. 2) Install the flywheel aligning the flywheel key way with the woodruff key. 3) Secure the flywheel with the holder. (P. 6-2 of the base shop manual). 4) Apply a thin coat of engine oil to the flanged part and threads of the 18 mm special nut, then tighten it to the specified torque. TORQUE: 39 N-m (4.0 kgf-m, 29 Ibfsft) 5) Tighten the 18 mm special nut to an additional 90" rt15". [l] 18 mm SPECIAL NUT [3] CRANKSHAFT I r41 I X: Degrease. 0: Apply engine oil.
0: Clean.