BF25D/30D BF25D-BF30D — Sep '94

B F25D-B F30D Spring Pin Removal Drive out the 2.5 x 20 mm spring pins from the tilting bracket using a commercially available pin driver as shown. CAUTION Drive out the 2.5 x 20 mm spring pins with care not to let it contact the swivel case. Spring Pin Installation 1) Install the tilt stoppers and tilting bracket on both sides of the swivel case. 2) Set the tilt stoppers and tilting bracket in the position shown. 3) Using a commercially available pin driver, install the 2.5 x 20 mm spring pins by aligning the spring pin installation hole in the tilt stopper with the spring pin installation hole in the tilting bracket.

4) After installation, be sure that the spring pin is not protruding from the tilting bracket. / [4] TILT STOPPER (2) 131 2.5 x 20 mm SPRING PIN (2) 13-1 2