B F25D.B F30D Ignition SwitcWEmergency Stop SwitcMndicator 1) Remove the under cover, then remove the throttle cable and shift cable (P. 15-3). 2) Disconnect the tiller handle wire harness (P. 15-4). *1: Except mechanical tilt type 11 EMERGENCY STOP SWITCH INSPECTION: P. 15-1 2 ASSEMBLY: Install the emergency stop switch by aligning the cutout in the switch with the flat part of the handle installation section. [6] SWITCH CLIP 121 ' *1 IGNITION SWITCH INSPECTION: P. 15-1 2 ASSEMBLY: Install the ignition switch by aligning the cutout in the switch with the flat part of the handle installation section. r21-1 INSPECTION: P. 15-12 ASSEMBLY: Install in the direction shown. 15-6