Removing and installing turbocharger Fig. 5 Check intake lines and exhaust manifold for for- eign matter. Check oil supply and return lines for damage, clogging and leaks. Remove old seals completely and fit new ones. Connect up air filter and charge-air pipes. 5 Fig. 6 Tighten mounting bolts to specified torque. Fill bearing housing up with clean engine oil. Connect up oil supply line. Prior to mounting the oil return line let engine turn over until a constant oil stream emerges from the turbocharger. Mount oil return line. 6 Fig. 7 Connect up charge-air pipes. Check all connections for leaks and tension. Note: Leaky charge-air pipes cause charge-air pressure loss.
This results in the formation of black smoke and poor performance. Caution: Comply with instructions for masking unions on pressurised oil and fuel pipes (see page 3). 7 100