MAN — Removing and installing cylinder head

Removing and installing cylinder head Fig. 5 Remove cylinder head bolts in reverse order of tightening. Note: Use reinforced socket (screw-driving ma- chine) to loosen and tighten the cylinder head bolts. On engines recently manufactured Torx bolts are fitted for which an E20 − Ѕ wrench is required. Fig. 6 5 Remove the mounting bolts from the intake and exhaust pipes for the respective cylinder head. Also remove those intake and exhaust pipe bolts, which are adjacent to the respective cylinder head. This will reduce the tension on the cylinder head, and the head can be taken off more easily. 6 Fig. 7 Take off cylinder head and cylinder head gasket.

Check whether cylinder head sealing face and cyl- inder block are plane using a straight edge. Non-plane cylinder heads can be remilled 1 mm. Notice specified projection of injection nozzles and valve recess (see “Engineering S Data S Setting values”). Note: Check cylinder heads for cracks. 7 105