V-belts Checking condition Fig. 1 D Check V-belts for cracks, oiling, overheating and wear. D Change damaged V-belts. 1 Checking tension 1 Fig. 2 Use belt tension indicator to check V-belt tension. D Lower the gauge arm А in the scale. D Position the tension indicator in the centre of the belt between the two pulleys so that the edge of the stop face Б locates against the side of the belt. D Slowly depress the pressure pad В vertically downwards until the spring disengages with an audible click; the gauge arm moves upwards. 2 3 A false reading will be obtained if you continue to apply pressure after the spring has disengaged. Taking tension reading 2 Figs.
3 and 4 3 D The tension is shown where the top of the gauge arm А intersects the kg scale. D Ensure that the gauge arm does not move be- fore you take the reading. If the reading does not correspond with the speci- fied value, the V-belt tension must be corrected. 4 150 Riemen- breite Spannkräfte nach kg-Skala auf dem Gerät bei Neumontage bei Wartung nach längerer Laufzeit bei Montage nach 10 min. Laufzeit 10 50 45 40 13 55 50 45 20,0 75 70 60 22,0 75 70 60 2/3VX 90-100 80-90 60 3/3VX 135-150 120-135 90