Removing and installing intake manifold D Drain coolant, see page 49 Note: When carrying out work on the intake sy- stem ensure meticulous cleanliness to avoid damage to the engine. Removing intake manifolds Fig. 1 The intake manifolds are located in the engine’s V area. For this reason the intercooler, charge-air pipes and injection lines must be removed first. 1 Fig. 2 Remove charge-air manifold. For this purpose the heat exchanger must be removed. 2 Fig. 3 Numerous brackets for fuel lines and air hoses for the charge-air pressure control valves (only on LE4.. models) are attached to the intake manifolds.
Before removing these lines, memorise or note down in a drawing the position of the individual brackets, hose clamps, discs etc to facilitate sub- sequent assembly. 3 Fig. 4 Loosen mounting bolts and remove intake manifolds. Caution: Ensure that no impurities get into the in- take ducts. 4 89