EPA07 MBE 4000 SERVICE MANUAL 2.1.1 Removal of electronic unit pump Removal steps are as follows: 1. Remove the engine trim cover. 2. Unscrew the fuel filter cap to allow fuel to drain back to tank. See Figure 2-2. 1. Fuel Filter Cap 3. Filter Element 2. O-ring Figure 2-2 Main Fuel Filter NOTE: Unscrewing the fuel filter cap releases pressure in the fuel system, causing fuel to flow through the return lines and back into the tank. All information subject to change without notice. DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION 2-5