Detroit Diesel — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\compdisp049\compdisp

EPA07 MBE 4000 SERVICE MANUAL All information subject to change without notice. DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION 2-75 Tool Tool Name Usage Part Number Thrust Bolt Torque Wrench Adaptor 24 mm Used to hold or torque the thrust bolt. J–47484 electronic unit pump O-ring Installer Used to remove and install O-rings on electronic unit pump. J–45373 4-Toothed Socket Used to remove the injector protective sleeve from the cylinder head. J–46186 Fuel Pump Gear Locking Tool Used to lock the fuel pump drive when installing driven gear. J–46187 High Pressure Line Torque Wrench Adaptor 24 mm Used to remove, install and torque the injector high pressure fuel lines.

J–46371 Injector Heat Isolator Installer Used to install the heat isolator on the fuel injector. J–47387–A Injector Sleeve Puller Used to remove the injector protective sleeve from the cylinder head. J–46381 Engine Barring Tool Used to lock or rotate the engine flywheel. J–46392 Injector Heat Isolator Remover Used to remove a stuck injector heat isolator from the cylinder head. J–46933