EPA07 MBE 4000 SERVICE MANUAL Oil Pump The oil pump inspection limits are listed in Table 3-7. Listed in Table 3-8 are the oil pump installation specifications. Table 3-7 Oil Pump Inspection Limits Table 3-8 Oil Pump Installation Specifications Oil Cooler The minimum engine oil pressure is listed in Table 3-9. Table 3-9 Engine Oil Pressures Table 3-10 Special Tools All information subject to change without notice.
DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION 3-39 Description Limits mm (in.) Diameter of Shaft Bore (in pump housing and face plate) 22.000-22.021 (0.8661-0.8670) Diameter of Idler Gear and Pump Drive Gear Shaft 21.93-21.94 (0.8634-0.8638) Clearance of Pump/Idler Gear to Walls of Pump Housing 0.030-0.122 (0.0012-0.0048) Oil Pump Gear Backlash (clearance between gear teeth) 0.312-0.476 (0.0123-0.0187) Description Specifications mm (in.) Projection of Pump Drive Gear 0.5 (0.02) Pump/Idler Gear End Play 0.050-0.128 (0.0020-0.005) Backlash of Oil Pump Drive Gear and Crankshaft Gear 0.077-0.333 (0.0030-0.1311) Engine Speed Minimum Pressure kPa (psi) At idling rpm 50 (7) At maximum rpm 250 (36) Tool Description Usage Part Number Engine Barring Tool Used to lock or rotate the flywheel.
J–46392 Oil Cooler Leak Test Kit Used to pressure test the oil cooler element. J-47402