Detroit Diesel — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\compdisp049\compdisp

EPA07 MBE 4000 SERVICE MANUAL To avoid injury from flying debris, wear a face shield or goggles. EYE INJURY NOTE: Remove only enough material to allow a socket to fit on the banjo bolts. 13. Using a die grinder or other suitable device, remove material from the EGR cooler support bracket as shown in Figure 4-16. Do not remove cylinder head covers before this modification. Figure 4-16 EGR Cooler Support Bracket 14. Remove shavings and clean cylinder head area, taking care not to allow metal shavings into any part of the engine. 15. Remove the cylinder head covers from cylinders 1-4. Refer to section 1.2.1 "Removal of Cylinder Head Cover." All information subject to change without notice.

DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION 4-27