1.3 CYLINDER HEAD 1.3 CYLINDER HEAD The MBE 4000 engine has individual heads for each cylinder. To remove one head, follow these instructions, step by step. To remove all the heads, repeat each step in these instructions, as applicable, for all six cylinders. 1.3.1 Removal of Cylinder Head See Figure 1-4 for an exploded view of a cylinder head. 1. Pushrod 8. Spacer 2. Cylinder Head 9. Exhaust Port Gasket 3. Seal Ring 10. Cylinder Head Gasket 4. Hollow Core (Banjo) Bolt 11. Exhaust Manifold 5. Coolant Line 12. Exhaust Manifold Mounting Bolt 6. Cylinder Head Bolt 13. Guide Pin 7. Constant-Throttle Line Figure 1-4 Exploded View of Cylinder Head All information subject to change without notice.
1-8 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION