EPA07 MBE 4000 SERVICE MANUAL 5.2 LUBRICATING OIL The engine is delivered from the factory filled with an approved engine oil. NOTICE: The use of non-approved engine oils could affect warranty rights, and cause engine damage. To ensure long and trouble-free service, it is important to select oil of the correct viscosity and service designation. Only multigrade oils of American Petroleum Institute (API) service designation CJ-4 should be used in 2007 MBE 4000 engines. Look for the service mark printed on the oil container. See Figure 5-1.
Figure 5-1 API Lubricant Service Mark When maintenance work is performed, record engine oil changes including details of the brand used, the quality category, and the Society of Automotive Engineers (SAE) viscosity rating of the oil. When topping off, use only engine oils of the correct API designation and SAE rating. 5.2.1 Synthetic Oils Synthetic oil may be used in MBE 4000 engines, provided they are of the correct API designation and viscosity, as required for non-synthetic oil. Synthetic oil offers improved low-temperature flow properties and high-temperature resistance to oxidation. However, it is generally more costly than non-synthetic oil.
Review carefully the product information published by the synthetic oil manufacturer. Performance additive systems often respond differently in synthetic oil. Use of synthetic oil does not change the recommended oil change service interval. All information subject to change without notice. DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION 5-5