EPA07 MBE 4000 SERVICE MANUAL 5.A ADDITIONAL INFORMATION Description Page SPECIFICATIONS ............................................................................................. 5-13 Coolant ........................................................................................................... 5-13 SPECIFICATIONS This section contains the specifications for servicing the engine. Coolant Listed in Table 5-3 are the coolant specifications. The coolant mixing ratio is listed in Table 5-4. Table 5-3 Coolant Specifications Table 5-4 Coolant Mixing Ratio All information subject to change without notice.
DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION 5-13 Type of Coolant Requirement Fully-Formulated Ethylene Glycol TMC RP-329 Type "A" Water plus Corrosion Inhibitors Temperature Must Not Fall Below 0°C (32°F) Antifreeze Protection Down to °C (°F) Water % by Volume Corrosion - Inhibiting Antifreeze % by Volume –37 (–34) 50 50 –52 (–62) 40 The cooling mix ratio is Max. 60