Detroit Diesel — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\compdisp049\compdisp

Torque Values The torque values for components in this chapter arelisted in Table 7-4. Table 7-4 Torque Values Special Tools The special tools used within this chapter are listed in Table 7-5. Table 7-5 Special Tools All information subject to change without notice.

7-30 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION Description Torque N·m (lb·ft) unless otherwise noted Bolts — Exhaust Manifold Alignment Plate 20 (15) Clamps — Exhaust Manifold Connector 8 (6) Exhaust Manifold Heat Shield Bolts 25 (18) Exhaust Manifold Bolts 50 (37) + 90° Brake Gate Lever Bolt 11 (8) Actuator Bracket Bolts to Brake Gate Housing 20 (15) Brake Gate Actuator Bolt to Mounting Bracket 20 (15) Brake Gate Solenoid to Mounting Bracket Bolts 25 (18) Adaptor Fitting — to Side of Brake Gate Solenoid 15 (11) Air Line Banjo Bolt to Side of Brake Gate Solenoid 15 (11) Small Banjo Bolt to Threaded Connection on Bottom of Brake Gate Solenoid 15 (11) Adaptor Fitting on Bottom of Brake Gate Solenoid 50 (37) EPV to Mounting Bracket Bolts 25 (18) EPV Bracket to Cylinder Block Bolts 100 (74) Tool Description Usage Part Number Exhaust Manifold Alignment Plates Used to assemble the 3–piece exhaust manifold prior to installation J-48670