Yamaha Motor Corporation, USA 115A/130A/L130A/150A/V150A — MAINTENANCE

E EMU01304 Connecting the Battery w Mount the battery holder securely in a dry, well-ventilated, vibration-free loca- tion in the boat. Install the fully charged battery in the holder. c C 8 Make sure the main switch (on applica- ble models) is “OFF” before working on the battery. 8 Reversal of the battery leads will dam- age the rectifier. 8 Connect the RED lead first when installing the battery and disconnect the RED lead last when removing it. Otherwise, the electrical system can be damaged. 8 The electrical contacts of the battery and cables must be clean and properly connected, or the battery will not start the engine. q Connect the RED lead to the POSITIVE (+) terminal first.

Then connect the BLACK lead to the NEGATIVE (-) terminal. 8 Using a single battery Connect both red cables 1 and 2 to the (+) terminal. w UPPER LEVEL LOWER LEVEL w 000863 Do not leave cable 2 unconnected. If it accidentally contacts the NEGATIVE (-) terminal of the battery, there will be a short circuit. Electrical system damage and a fire could result. 4-27