E EMU01125 POWER TRIM/TILT SWITCH The power trim/tilt adjusts the motor angle in relation to the transom. The power trim/tilt switch is located on the side of the bottom engine cowling. Push- ing the switch “UP” trims the motor up, then tilts the motor up. Pressing the switch “DN” tilts the motor down and trims the motor down. When the switch button is released, the motor will stop in its current position. w UP DOWN 302012 Use the power trim/tilt switch located on the bottom engine cowling only when the boat is at a complete stop with the engine off.
Attempting to use the cowl- ing-mounted power trim/tilt switch while the boat is moving could increase the risk of falling overboard and could distract the operator, increasing the risk of colli- sion with another boat or an obstacle. NOTE: Refer to the section “Adjusting Trim Angle” and “Tilting Up/Down” for instruc- tions on usage. 2-10