E EMU01109 Trim Meter This meter shows the trim angle of your outboard motor. NOTE: 8 Memorize the trim angles that work best for your boat under different condi- tions. Adjust the trim angle to the desired setting by operating the power trim and tilt switch. 8 If the trim angle of your motor exceeds the trim operating range, the top seg- ment on the trim meter display will start to blink. 001050 EMU01620 Hour Meter This meter shows the number of hours the engine has been run. It can be set to show the total number of hours or the number of hours for the current trip. The display can also be turned on and off.
8 Changing the display format Pressing the MODE button changes the dis- play format in the following circular pattern: Total hours - Trip hours - Display off 8 Resetting the trip hours Simultaneously pressing the SET and MODE buttons for more than 1 second while the trip hours are displayed resets the trip counter to 0 (zero). NOTE: The total number of hours the engine has been run cannot be reset. 001087 2-12