Operating & maintenance manual 4.1.2 Securing the compaction roller on the transport vehicle Attach the articulation-lock device ( 1 ) on the left side, between the front and rear end. Secure the bolt ( 2 ) by means of a safety splint pin ( 3 ). 4.1.3 Tying the compaction roller to the transport vehicle x The compaction roller disposes of four lifting lugs ( 4 ) at the front frame and two lifting lugs at the rear end ( 5 ). x Use chain hoists to secure the compaction roller on the flat bed truck at the six lifting lugs. x Make sure the distances and the length of the chains are sufficient. 1 2 3 Fig. 6 Articulation-lock device Lifting lugs front Lifting lugs rear 4 5 Fig.
7 Securing the compaction roller 22 NOTICE Observe the national laws regarding tie-down safety standards! WARNING The compaction roller may only be fastened to the transport vehicle at the labeled lifting lugs at the front frame and at the rear end.