Operating & maintenance manual 7.1.1 Longitudinal adjustment x Make the necessary adjustments by means of the corresponding locking lever on the right side of the seat. x Pull the locking lever outwards and move the driver‘s seat into the desired position until the locking lever clicks into place. Fig. 2 Longitudinal adjustment 7.1.2 Position of the backrest x Adjust the backrest by means of the corresponding handle on the right side of the seat. x Turn the handle into the desirted direction and adjust the backrest as required. 7.1.3 Rotation of the driver’s seat x You can rotate the seat by means of the lever on the left side of the seat. x Pull the lever upwards.
x Sit down on the seat and rotate it into the desired direction. x Let go of the lever and make sure it clicks into place. Fig. 2 Rotating the seat 36 WARNING After making the required adjustments, ensure that the locking lever has clicked into place. If this is the case, the position of the driver‘s seat is fixed, i.e. it must not be possible to move it into another position any more! Fig. 2Backrest inclination NOTICE After making the required adjustments, ensure that the inclination of the backrest is correct. As long as it is still possible to move the seat or the backrest, you may not start the compaction roller.
WARNING After making the required adjustments, ensure that the locking lever has clicked into place. As long as it is still possible to move the seat or the backrest, you may not start the compaction roller.