Operating & maintenance manual 8.1.6 Functions of the joystick red x The joystick ( 1 ) in the right armrest is used to control the direction of motion and the speed of the compaction roller. x The “vibration” button ( 2 ) on the front of the joystick activates and deactivates the vibration. Different colors serve to identify the functions of the ergonomically arranged buttons:
Green = idle mode of the Diesel engine Blue = driving without working Red = driving & working Yellow = ECO speed (optional feature*) yellow blue 2 green 1 *If this feature is not available, the button serves to reduce the diesel engine speed (working is not possible in this mode) For further information on ECO speed, please see: Working with the compaction roller: Soil compaction in this manual. The colored buttons on the joystick are not available for all engine variants. In connection with emission stage EU2 Diesel engines, adjust the rotational speed via the hand gas lever. Fig.
3 Joystick functions 8.1.7 Control panel in the right armrest The following switches in the control panel ( 2 ) in the right armrest ( 4 ) control the functions for driving and the operation of the drum. 45 NOTICE x Compaction rollers with emission stage EU2 Diesel engines only dispose of the button for vibration (2) on the joystick. With these compaction roller types, use the bowden cable with the hand gas lever to adjust the rotational speed. x Compaction rollers with emission stage EU3, EU4 and EU5 are equippped with the colored buttons on the joystick, as described above. NOTICE x The more the joystick is moved into the desired direction, the higher the speed of the compaction roller.
x The max. speed is reached in the respective final position of the joystick. x In the middle (neutral) position, the compaction roller stops. Fig. 3 Functions of the switches 1 Operating modes Ɣ Turtle: Front of the switch pressed down Ɣ Rabbit: Rear of the switch pressed down 2 Parking brake 3 Vibration type, soil compaction Ɣ Middle position (0): Vibration off Ɣ Front pressed down (KA): Surface compaction / low amplitude Ɣ Rear pressed down (GA) Deep compaction / high amplitude 4 Vibration control Ɣ Front pressed down: Automatic Ɣ Rear pressed down: Manual actuation 5 Override Rear Axle on/off 6 Override Hydraulic motor Drum on/off