Operating & maintenance manual 19 Maintenance instructions for the driver 19.1.1 Spare parts required for maintenance work: Maintenance kits In order to carry out the required maintenance work, order our maintenance kits from the customer service. 19.1.2 Table of lubricants 1 HYDR OIL HE46 Bio-degradable high-quality fluid for advanced hydraulic systems. The majority of the requirements laid down in part 3 of DIN 51524 for HVLP hydraulic oils are met. Besides, it disposes of additional features not covered by DIN 51524/part 3. If thus equipped by the manufacturer, the vehicles are provided with adhesive labels at the hydraulic tank, in the cab and at the attachment.
86 WARNING Risk of property damage and accidents caused by inexperienced maintenance work and ignorance of default maintenance intervals! x If you do not have the skills and knowledge required to perform the maintenance work, have it carried out by qualified service staff. x Never neglect the required maintenance work! SAFETY INSTRUCTIONS Obligation to inform yourself! Before taking any maintenance measures at the compaction roller, be sure to consult the chapters on safety instructions and safety precautions for maintenance work.
Greasing point Lubricant Viscosity Equvalent standard Diesel engine See service manual for the diesel engine Choose the viscosity of the lubricant so it suits the ambient temperature API classification Standard quality DQC II-05 CG-4 or CH-4 or CI-4 Or CI-4 Plus or CJ-4 Arctic climate SAE 0W - 30 SAE 0W - 40 Temperate climate SAE 10W - 30 SAE 10W - 40 Tropical climate SAE 20W - 50 All clime zones SAE 15W - 40 Axles Transmission HLS Approved: Fuchs TITAN GEAR LS-90 Shell rear axle oil LS-BMW ELF Tranself BM-LS 90 Roller bearing Floating bearing General greasing points Order no.
0346905 KPF-2 K – 30 DIN 51825 with MoS2 additives NLGI 2 DIN 51818 Lithium grease with MoS2 additives which enhance the emergency running properties Hydraulic oil Spezial 46 46 Observe the specifications of the hydraulic oil to be used! Pay particular attention to the specifications referring to operation at temperatures below 0ºC (32ºF). Be sure to preheat the oil sufficiently. Bio-degradable oil HYDR OIL HE 461 at 40 ºC (104 ºF): 50.8 mm2/s Brake fluid container Brake fluid Hydraulic oil ATF Dexron II at 40 ºC (104 ºF): 34 mm2/s Protective cooler fluid Monoethylenglycol Approved: with organic Inhibitors TOTAL GLACELF AUTO SUPRA